#Oxygen not included steam power generator#

The top setting shuts the generator off, and the bottom setting turns it on. Click on the smart battery, in normal view, and at the bottom there are 2 settings. It outputs Water with the same mass as input Steam at a fixed temperature of 95 ☌. In the automation overlay, there will be a plug icon to the power source and the smart battery. While active, every non-blocked inlet will use 0.4 kg of Steam (for a max of 2 kg with 5 inlets) per second. The power output depends on the consumption rate and the temperature of the steam. Note: not all of the inlets need to be uncovered for full functionality (see below). is the produced power in W, is the mass flow rate in kg/s and is the temperature of the steam in Celsius. To use the generator it must have hot steam below its base, a water output and a power connection. If its temperature gets higher than 100 ☌, the warning message 'Turbine too hot' will appear, and the turbine will cease to operate. If the steam below the generator becomes less than 125 ☌ the Steam Turbine will cease to produce any power.Īdditionally, the steam turbine itself must be kept below 100 ☌. The steam below the generator must be at least 125 ☌. 3.3.3 Comparing Power Efficiency of Coolants.

3.3.1 Using Water or Polluted Water as Coolant Draws in Steam from the tiles directly below the machines foundation and uses it to generate electrical Power.

3.2 Variable number of inlets at high temperatures.

3.1.1 Maximum Steam Temperature for sustainable self-cooling.